2L Lab Spray Dryer Machine Liquid Drying Machine 220V for Thermosensitive Material

Introduction: <br>Spray dryer can be used to convert liquid materials directly into micro powder, without filtration, concentration, crushing before drying, and have a wide range of applicability to all solution consumables, such as emulsions, suspensions, etc. Mainly applicable to laboratories, universities, research institutes and food, biology, beverage, chemical, material, pharmaceutical and other enterprise laboratories. <br> <br>Parameter: <br>Inlet air temperature control: 30~300 ℃ <br>Outlet air temperature control: 30~150 ℃ <br>Evaporation water: 2000 mL/H <br>Maximum feeding capacity: 2000 mL/H <br>Voltage: AC 220V <br>Number of phases: Single phase <br>Electric heater power: 3 KW <br>Fan: 0.5KW (Maximum air volume: 5.6m3/min; Maximum air pressure: 1020Pa) <br>Air compressor: 0.2KW (Maximum gas production: 4.2m³/h) <br>Working pressure of compressed air: 2~3 Bar <br>Nozzle diameter: 0.04" (1.00mm) <br>Operating temperature: 10~40 ℃ <br>Real-time temperature control (PID): ±1 ℃ <br>Real-time display temperature accuracy: 0.1 ℃ <br>Packing size: 35"*27.5"*57.5" (89cm*70cm*146cm) <br>Net weight/Gross weight: 207LB(94kg) / 289LB(131kg) <br> <br>Items Included: 056809 <br>Lab Mini Spray Dryer Machine

• Automatic, manual dual mode, PLC control, color touch screen display, English operation interface, all parameters are LCD display: control temperature, air volume, air pressure, pump speed, unplugging frequency.
• In order to keep the sample pure, equipped with air inlet filter; After drying, the particle size of the finished dry powder is more uniform, and more than 95% of the dry powder is in the same particle size range.
• Jet device can automatically dredge (needle) and frequency can be adjusted. when the nozzle is blocked, the machine can automatically remove the obstacles in order to ensure the continuity of the experiment.
• Shutdown protection function: Just press the stop button when shutting down, and the machine will stop running immediately except for the fan to ensure that the equipment will not burn out the heating part due to misoperation (forced closure of the fan).
• powder particles diameter is normally distributed with good liguidity and low noise which is less than 60 db according with standards for laboratory.